Welcome to shenzhen saco electronic technology co., LTD. Official website of heater movement
Service Hotline 0755-33929888
You are here:Home >> FAQ

FAQ

FAQ

Contact us

Tel:0755-33929888
400:40000-92566
Mobile:18617011633
QQ:3580569118
Email:3580569118@qq.com

FAQ

Do we need to maintain the electromagnetic heater in our daily life?

Time:2018-06-20 Views:1130
    As a popular heating method nowadays, electromagnetic heaters need to be cleaned and maintained regularly on weekdays, such as:
    1. Pay attention to moisture-proof, clean the dust and rearrange the line before power on, so as to avoid short circuit and electric explosion.
    2. Regularly check the operation condition of the exhaust and replace fan of the control box, and clean up the dust accumulated on the blade and fan network to ensure good ventilation. If the exhaust fan is damaged, it should be replaced timely.
    3. It is forbidden to place other articles (especially magnetic metal articles) around the heating coil (within 200mm) to prevent accidents; The heating coil must be careful not to get water in case of electric shock and damage to the heater.
    4, heater on a host of automatic control box, filter oil electromagnetic rice and other electrical components are in accordance with the general low voltage electrical maintenance, maintenance strategy, automatic control box of the performance parameters of both by manufacturer before they go out serious debugging, users do not do STH without authorization changes; Make sure the thermal control is in good condition. Check it regularly. If the micro switch fails or is damaged, please replace it in time.
    5, timely cleaning dust dirt and cooling fan in the movement, because the cooling fan inside the dust suction machine for a long time, if long time don‘t clean up, dust if be affected with damp be affected with damp is easy to damage in the movement, the cooling fan for a long time dust is abnormal also, make sure the fan operating normally (need) to replace damaged, ensure good heat dissipation, lest PCB automatic protection because of bad cooling temperature is too high to stop working.
Copyright 2018 Shenzhen Sai Ge Electronic Technology Co., Ltd._CZD All Rights Reserved    

粤公网安备 44031102000201号